Waire P2 Respirator Mask (4 x Single use masks)
A Class P2 particulate respirator is used to protect against mechanically and thermally generated particulates (dust, mists, and fumes). It is the responsibility of the user to ensure the suitability of this respirator for the application.
Click here to read the FDA EUA end user letter
Free shipping on orders of $25 or more
A Class P2 particulate respirator is used to protect against mechanically and thermally generated particulates (dust, mists, and fumes). It is the responsibility of the user to ensure the suitability of this respirator for the application.
Click here to read the FDA EUA end user letter
Free shipping on orders of $25 or more
A Class P2 particulate respirator is used to protect against mechanically and thermally generated particulates (dust, mists, and fumes). It is the responsibility of the user to ensure the suitability of this respirator for the application.
Click here to read the FDA EUA end user letter
Free shipping on orders of $25 or more
The WAIRE™ P2 respirator mask must be fitted and adjusted correctly to your face to provide the intended protection.
Lightweight construction for added comfort that may increase wearer time. Has a 4-point head harness for a secure and comfortable fit
Nose wire allows the wearer to shape to the nose, reducing eyewear fogging and forming a better seal.
Made from Lanaco HELIX™ Advanced Filter Material for effective filtration with low breathing resistance
Does not contain components made from natural rubber latex
Protects against hazards, such as dust, mists, smoke and fumes
Complies with AS/NZS 1716:2012 standard and approved at a P2 level
Exceeds 95% filtration efficiency in laboratory testing when tested at 95 L/min against a salt aerosol (VicLab Australia, INSPEC United Kingdom)
Advanced wool hybrid electrostatic filter media – low breathing resistance, moisture-wicking and naturally bacteriostatic
IMPORTANT:
Read all warnings and instructions prior to using this mask. Fit the respirator correctly before entering the contaminated area. When fitted properly, this respirator helps to protect the user against certain particles in certain environments. The user must be trained and follow all instructions and local government regulations on the use of respirators, including this product. Misuse of this product can result in sickness, injury, or death.
DO NOT use these respirators:
• For protection against gases, vapors or radioactive contaminants, or for concentrations of contaminants that exceed ten (10) times the Exposure Standard.
• In environments with an oxygen concentration below 19.5%, as this respirator does not supply oxygen.
• When they are modified or damaged.
• With any conditions that prevent a good seal between the face and sealing edge of the respirator, including but not limited to beards or other facial hair.